Differences

This shows you the differences between two versions of the page.

--- configurator-gui [2025/12/30 23:46] – robyn
+++ configurator-gui [2026/01/01 16:25] (current) – robyn
@@ Line 40: / Line 40: @@
   * CTX: Context Length 4096 is the standard but if you are low on VRAM, reduce it to 2048 or 1024. If you have lots of VRAM and the Model has a large context, 200K for example, you can make it larger, but it will cause slower performance.
   * Temperature: The LLMs creativeness. If you want a Mad AvaDroid, you could try 1.8 or even 2.0. the lower the more sensible (boring) the AvaDroid becomes, going higher than 2.0 will eventually have the AvaDroid babbling gibberish.
-  * This is the first part of the AI "System Prompt" which tells the AvaDroid's AI how to function. Do not change this unless you know what you are doing. If you do change, take a copy of the included one first. There was a lot of research and trial and error to arrive at this one.
+  * This is the first part of the AI "System Prompt" which tells the AvaDroid's AI how to function. Do not change this unless you know what you are doing. If you do change, take a copy of the included one first. There was a lot of research and trial and error to arrive at this one. See [[instruction_analysis|AI Instruction Design Analysis]]
+== 4. Corrade Settings ==
+These are the settings needed for the AvaDroid Container to talk to the Corrade Container.
+  * IP Address/Name: The IP number of the Docker Host Corrade is on, it should be set from the initial configuration.
+  * MQTT Port: The port you mapped to 1883 in the compose.yml file.
+  * Nucleus Port: The port you mapped to 54377 in the compose.yml file.
+  * Group: the group you created, the AvaDroid joines and you configured in Nucleus.
+  * Password: The password you created in Nucleus for the group which is the AvaDroid software to Corrade authentication.
+== 5. Save/Cancel ==
+  * Save: Saves all the settings to the config.yml file and reloads this file. These are your default settings.
+  * Cancel: Cancels the edit and reloads the config.yml.